If they are, you’ll need to screw the 2.5-inch drive to the 3.5-inch tray so it doesn’t move around. The number of screws you will need to mount the motherboard will vary based on the board, but a full-size ATX motherboard usually takes 9 screws. Take the motherboard out of its antistatic packaging and put it on your work surface. Find the CPU socket, which will be covered with a protective plastic cap.
Make sure the power supply is connected to the motherboard and GPU, then plug it in and turn it on. Last but not least, you’ll need to prepare to install an operating system once all the other components have been assembled in the case. An operating system is a critical piece of software that assists in managing communications between a computer’s hardware and programs. SSDs use NAND-based flash memory — similar to, but faster and more reliable than the flash memory used in a USB flash drive — to store data. In lieu of a mechanical arm, they use integrated processors to access stored data, making them much faster and less prone to mechanical failure than HDDs.
In addition to general system cooling, you’ll also need to purchase a dedicated CPU cooler. CPU coolers come in both air and liquid form factors and mount directly onto your CPU. When shopping for a CPU cooler, it’s important to make sure it’s compatible with your CPU and sized to fit your build. Liquid cooling uses a liquid coolant to soak up heat from components and move it to an area that’s less restricted .
- Our range includes, Graphics Cards, Processors,Motherboards and many more.
- We stock a large range of computer components, from graphics cards to motherboards, processors, RAM, cases and much more.
- Blueberry_Aniseed Mine is 1TB version, cache is much smaller than they claimed, also speed dropped to 20-30mb.
- Then, uninstall the GPU and unplug all power cables before proceeding with the next step.
- Integrated graphics have improved significantly throughout the years, though they are still generally less powerful than discrete graphics.
Use as many screws as the chassis manual recommends, but if you don’t have enough screws most drives will be fine with just two screws. Storage generally comes in two sizes, 2.5-inch and 3.5-inch . Most 3.5-inch bays can accept 2.5-inch drives, but not vice versa (some 3.5-inch bays will have trays that aren’t designed for 2.5-inch drives, but they can still fit 2.5-inch bays). You may also see larger bays in your case — these are for larger drives such as optical drives and are usually located in the front of the case, near the top.
Choose Your Components
The power switch pins may be labeled (something like “PWR_ON”). To turn the motherboard on, use a screwdriver to tap both power switch pins at once. If you’re going to fill all available RAM slots, simply snap the RAM into place. If you’re not going to fill all of the RAM slots, consult the user manual to find the correct configuration and populate the RAM slots accordingly.
To figure out what it’s trying to tell you, consult your user manual. If your motherboard has no post code display, connect a display to the GPU and see if your system “posts” or starts up and displays the motherboard’s logo. If you want to install an M.2 SSD, now is a good time to do so. It’s a small, horizontal slot with a tiny screw across from it. If you can’t find it, if you find multiple M.2 slots, or if you are planning on installing more than one M.2 SSD, consult the user manual that came with your motherboard.