When your drivers are outdated, it is possible for your computer to get stuck in a reboot loop. This is because your devices are not able to properly communicate with your system. Most Blue Screens of Death are hardware or driver related, so updated drivers could fix the cause of the STOP error. Sometimes, your system space may get filled during the update, causing some of the files to be missing, hence resulted in a corrupted file.

You can use CrystalDiskInfo hard drive monitoring tool to check the health of your hard drive. The tool will tell you the current health of the hard drive with signs like “Good”, “Caution” or “Bad”. If you have multiple RAM slots, then taking out each one of them one by one and starting the PC will help find the culprit. In the end, you will have to replace the corrupted RAM or the hard disk, whichever has the issue. You don’t have to run to the repair shop every time your PC ends up with an issue. Many of the common PC problems have a rather simple solution, and you can fix them yourself with a few simple steps.

Sign 2 Access Denied

In both cases, the nseconds field is to be added to the seconds field for the final time representation. Critical product support, upgrades, and alerts on topics such as safety issues or product recalls. How to fix problems in Windows after installing new software.

  • Your system will carefully scan the respective drive and will get rid of minor drive problems.
  • This can tamper with a system file or process related to its hard disk.
  • This is why it is important to ensure that you back up all the data on our Dell laptop before you attempt to factory reset the laptop.
  • Make sure there is paper in the tray, check the ink or toner cartridges aren’t empty, the USB cable is plugged in or the printer is connected to Wi-Fi.
  • Shutting down the app/computer or disconnecting the device will help to terminate all the running processes in Windows operating system.

There could be other reasons your computer runs slow, checkout the complete list and how to fix slow PC. Similarly, if the problem is with an external device connected to the computer, unplug and plug it again. Make sure it’s plugged in and turned on, that it has ink, and that there is a connection between the printer and the computer. Take the side of your desktop case off and take out the physical power connector. The power supply is going to be routing 3, 5 or 12 volts, through the board, so just check to make sure the it’s supplying the proper voltage. If the problem persists in safe mode, it is a fair bet that the operating system itself is to blame.

Keep Your System Updated

Before regularly encounter this problem, your Windows should start becoming slow first. The main reason behind this is due to lack of enough resources. An overclocked or misconfigured BIOS can cause all sorts of random issues, including BSODs. Some viruses can cause a Blue Screen of Death, especially ones that infect the master boot record or boot sector. For the second and third cases, which are the more serious case here, you need to hire professional computer repair service to replace the part.

Although your PC motherboard must support fan control to use this app. Afterward, close the clips and make sure they’re properly locked. The PC motherboard is smart enough to detect problems and sounds beeps in different rhythms to tell you. Here is an article on what it actually means when the PC beeps multiple times.