If you have tool-free bays, each bay will have its own plastic lever or switch. Open or unlock the lever or switch and you should be able to pull out the tray. Place your drive in the tray — some 3.5-inch trays will be designed to accept 2.5-inch trays. If they are, you’ll need to screw the 2.5-inch drive to the 3.5-inch tray so it doesn’t move around. When it’s fully seated, it will stand off the motherboard about a 35-degree angle.

Remember, you can always upgrade individual components later. Once you figure out how big you want to go, look for a case that’s close to that size. If you’re not set on a specific size, it’s better to err on the larger side.

How Hard Is It To Build A Pc?

We have a second, larger M.2 drive for mass storage, which is admittedly overkill for most builds. If you’re unsure, here are the best SSDs for gaming right now. PC building is no more difficult than completing a Lego set or building a piece of furniture given you have compatible components. There are so many amazing guides available on online on platforms like YouTube that will take you step by step through the pc builing process.

  • Good for removing all the packaging that components may come with.
  • To finish the installation, simply lower the socket covering and push the lever arm back into place.
  • The Central Processing Unit , also known as the processor, is basically the brain of your PC.

A motherboard is the first component you’ll want to choose. The motherboard dictates the physical form factor and size of your PC build, but it also determines what other pieces of hardware the computer can use. Choosing the right motherboard is vital to building your computer. First, make sure you find a motherboard that has the right socket type for your CPU. Then, check the diffrent features of the motherboards you are looking at. If you arent going to buy a video or sound card, make sure your motherboard has onboard video and/or sound.

How To Build Your Pc

Extended ATX motherboards are the largest (12 by 13 inches or 12 by 10.1 inches) and can often have eight RAM slots . Some higher-end CPUs feature hyper-threading, which allows each core to run multiple threads and offers improved performance on threaded software. We definitely recommend coming up with a budget before you start picking components (it’s easy for component shopping to get out of hand).

Haynes Manual

Do this before putting the motherboard inside the case. Liquid cooling uses a liquid coolant to soak up heat from components and move it to an area that’s less restricted . Liquid cooling is less dependent on airflow inside the chassis, and therefore more efficient at cooling specific components. Non-modular PSUs have all cables permanently attached.