The SATA port is notched, so the cable can only fit one way. After the SATA data cable comes the SATA power cable. We attached the necessary cable in an earlier step, and you should have several extras included with the power supply.

  • Three are three groups of processors; low end, average and high end.
  • When you’re determining which CPU to install, pay attention to the gigahertz – the higher the GHz, the faster the processor.
  • The tabs will click into place when the sticks are fully inserted.
  • The difference results in better speed, efficiency, and durability because small mechanical parts and spinning platters are much more susceptible to physical damage than NAND.
  • The CPU is the engine of your computer and sets the performance expectations for the entire build.

Integrated graphics processors are integrated with the CPU. Integrated graphics have improved significantly throughout the years, though they are still generally less powerful than discrete graphics. The most important thing to keep in mind when shopping for RAM is what your motherboard and processor can support. RAM that’s faster than what your system supports will downclock to run at your system’s capabilities.

How To Build A Gaming Pc

If you want your CPU to operate flawlessly, you should consider purchasing a CPU cooler. Some CPUs are shipped with CPU coolers, but most aren’t. Since every CPU has a specific socket, it’s best to purchase this part first and then find a compatible motherboard.

32 GB or more is recommended for high-performance gaming, graphic design, 3D modeling, and intensive multitasking. A computer case is a box that stores all PC components. It can be opened and closed and typically features designated spots where other parts need to be stored and attached.

Install Any M 2 Ssds

If your cooler does not have pre-applied thermal paste, you will need to manually apply thermal paste before you seat the cooler. To apply thermal paste, squeeze a small dot onto the middle of the CPU. Then, place the cooler on the CPU — the pressure will spread the thermal paste adequately. Monitors, keyboards, mice, headphones, and other peripherals mostly come down to personal preference. You don’t need to purchase these items with your components, but you will need a display, a keyboard, and a mouse to set up your system after you build it.

Your build will likely differ slightly, but most of the steps below are universal and will look and function very similarly. If there’s one potential cause for concern, it’s that those new to the process may find themselves wondering how to build a gaming PC . The number of screws you will need to mount the motherboard will vary based on the board, but a full-size ATX motherboard usually takes 9 screws.

The main thing to keep in mind when picking a case is where you’re going to put the computer. Your PC’s final location will dictate how big you can go, and it will also help determine whether various premium case features are worth splurging on. You probably don’t want to pay for a tempered glass side panel if the computer will be hidden under your desk, for example. You will need a Phillips #2 screwdriver for just about everything.