Use the power supply screws that came with it and screw it in tight. You’ll then need to use the case thumbscrews to secure the mounting bracket to the case. But before you do that, or modular power supplies, it’s a good idea to attach the appropriate cables. Your case should’ve come with a box or bag full of screws, zip-ties, and other odds and ends you’ll use for installation. This is our easy walkthrough to building a PC for the first time, with a video showing each step of the process.
Lastly, you’ll need scissors for cutting zip ties and unpacking components. Building a PC using separate, easy-to-follow steps is a great way to learn about how each individual component works. Assembling your own PC will supercharge your gaming experience and allow you to upgrade components at any time. When you are looking for someone to deep clean your PC or are not up to cleaning your custom-built PC, you can always call Computer Genie. Have you tried updating Windows, and now all you see is a blue repair screen or is your custom built PC in an update loop?
How To Build Your Pc
We also recommend joining a PC community like the Newegg Discord that can help you answer questions as they may come up. For informaiton on this topics, we recommend you review our PC building guide and are familiar with the step-by-step process. When you put all the parts together, make sure you have plenty of room to keep your build organized. Be aware of static electricity as you build – it’s one of the few ways the hardware can be damaged but it’s easy to avoid. It’s also helpful to keep a can of compressed air to remove any dust or fine debris from the interface as you’re installing the processor, memory, and SSD. Depending on the kind of PC you’re building, you’ll also need to adjust what you’re looking for with a case and power supply.
- Also you will want to make sure you get memory that works with your system.
- The PSU needs to be well-made and powerful enough to handle all current and future components, and it doesn’t hurt to have a warranty.
- Almost all motherboards have SATA which is a much fast hard drive interface and uses a thinner cable which helps with airflow in your case.
- If you don’t see a power button, locate the power switch pins — small pairs of prongs sticking out of colorful nodules.
- Building your own Windows PC has numerous benefits.
The book that I wanted to use is not this one the cover is not the same as the one that looked at on the internet was it because of the price but it arrived on time. I knew NOTHING about the innards of these machines. But last week I saw this book and thought, ‘I’m never going to build one, but this looks like a good way to find out exactly what all the bits do.
Install The Cpu Aio Cooler
// Performance varies by use, configuration and other factors. // Intel is committed to respecting human rights and avoiding complicity in human rights abuses. Intel’s products and software are intended only to be used in applications that do not cause or contribute to a violation of an internationally recognized human right. When you’re next checking the recommended specs for a new game you want to play, keep these possibilities in mind. The PC you just built will serve as your foundation for all the gaming experiences ahead, and fine-tuning your components is all part of the fun of owning it. Once the I/O shield is in place, you can install the motherboard.
Enjoy your new gaming PC and take pride in the fact that you assembled it yourself! When the time comes to upgrade anything in the future, as it inevitably will, you’re now better prepared to do so. Also, don’t forget to clean out the dust at least once every six months, if not quarterly.
Finally, the designated spots can make the building process much easier. Before installing, refer to your motherboard manual’s page about the RAM slots. This page will tell you which RAM slots are the ideal slots to use based on how many sticks you have.
Feed these cables through the PSU hole at the bottom of the case as you slide the power supply into place, and then use the thumbscrews to hold it in. RAM is the easiest hardware to install when you’re building a PC. Hold your memory modules on the side to avoid touching the chips and gold pins. Align the notches on the module with the ridge in the slot then firmly press the module in until it clicks. As you’re pressing, note that it takes about 30 pounds of pressure to fully install a module.